Giỏ hàng

AudioQuest Coffee USB Cable

Giá ban đầu
6,900,000₫
Giảm giá

Thương hiệu: AudioQuest

Xuất xứ: USA

Hàng nhập khẩu chính hãng mới 100%.

Bảo hành chính hãng 12 tháng.

GỌI NGAY HOTLINE: 0935.305.306 ĐỂ CÓ GIÁ TỐT NHẤT

Bình Minh AVTECH cam kết:

- Chỉ bán hàng chính hãng có nguồn gốc xuất xứ rõ ràng

- Giá cả cạnh tranh và nhiều ưu đãi.

- Tư vấn tận tâm, hậu mãi chu đáo & hỗ trợ kỹ thuật trọn đời.

- Giao hàng toàn quốc theo nguyên tắc: Đúng hàng - Đúng cam kết - Đúng hẹn

- Uy tín, tin cậy, chất lượng thật trên từng sản phẩm.

- Nhiều hình thức thanh toán TM, thẻ, thanh toán online, trả góp linh hoạt...


Tiêu đề

← Sản phẩm trước Sản phẩm tiếp theo →

AudioQuest Coffee USB Cable 1.5m
SOLID 10% SILVER CONDUCTORS
Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications, like HDMI audio. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality HDMI cables.
HARD-CELL FOAM INSULATION
Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion.
ALL CONDUCTORS CONTROLLED FOR RF NOISE DIRECTIONALITY


CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)
It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
DIELECTRIC-BIAS SYSTEM WITH RADIO FREQUENCY TRAP
All insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, dielectric-involvement (absorption and non-linear release of energy) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for very time-sensitive multi-octave audio. The inclusion of an RF Trap (developed for AudioQuest’s Niagara Series of power products), ensures that radio frequency noise will not be induced into the signal conductors from the DBS field elements. (DBS, US Pat #s 7,126,055 & 7,872,195 B1)